EN
After Treatment
1. After treatment, apply cream to the feet so that the skin becomes soft and tender.
2. Clean the device after each use (see the "Cleaning and Storage" chapter).
Cleaning and Storage
PLEASE NOTE!
■
Do not use any caustic or abrasive cleaning agents to clean the device. These may da-
mage the surface.
1. Remove the attachment (8) from the device (see the "Changing the Attachment" chapter)
and brush off any flakes of skin with the cleaning brush that is also supplied. Then rinse
off the attachment under running water.
2. Turn the ring (2) towards the
3. Remove the filter and tap it out. Clean it with the cleaning brush if necessary.
4. Place the filter on the device.
5. Place the ring on the device and turn it towards the
6. Place the attachment on the mount in the device. Please Note: The attachment must be
completely dry!
7. Place on the protective cap (1) and press it on firmly so that its locking lugs hook into the
suction openings in the ring.
8. Wipe down the device with a damp cloth and then dry it with a dry cloth.
9. Store the device and accessories in a dry place which is not accessible to children and
animals.
Technical Data
Article number:
Model:
Voltage supply:
ID of operating instructions: Z 06200 M DS V2 0622 mh
06200_DE-EN-FR-NL_A5_V2.indb 18
06200_DE-EN-FR-NL_A5_V2.indb 18
18
symbol and take it off.
06200
BG-F-900
6 V DC (4 x 1.5 V battery, AAA)
symbol to fix it in place.
20.06.2022 12:02:58
20.06.2022 12:02:58