Profile PCL-506 STRATUS Bedienungsanleitung Seite 13

Stratus Air Purifier
PCL-506
Cleaning and protection
 Always pull the plug out of the plug socket before
cleaning the filter.
 Clean the filter and the metal parts every 2 to 3
months with a damp cloth.
 Carefully place the air purifier with the back on the
ground and open as follows:
1. Open the front by pressing both tabs
simultaneously.
2. Take the dust collection tray out of the air purifier.
 Press the dust collection tray to the
bottom of the appliance.
 Hold the 2 tabs and take the filter out.
3. Take the first filter out of the air purifier.
This filter may be cleaned with cold water.
4. The electrostatic filter be can cleaned with hot
water and a brush. Note: use safety gloves to
prevent cut wounds.
5. Take the HEPA filter out of the air purifier. Note
the top and bottom sides when replacing this
filter!
You clean this filter with a vacuum purifier.
6. Take the TiO2 filter out of the air purifier. To do
this press in the clips on the sides. You clean
this filter with a dry towel or by blowing out the
dust.
EN - 2