Sony ILME-FX30 Bedienungsanleitung Seite 10

Notes on using memory cards
• When recording is finished, the
memory card may become hot. This is
not a malfunction.
• If (overheating warning icon) is
displayed on the monitor, do not
remove the memory card from the
camera right away. Instead, wait for a
while after turning off the camera, and
then remove the memory card. If you
touch the memory card while it is hot,
you may drop it and the memory card
may be damaged. Be careful when
removing the memory card.
Notes on using a tripod
Use a tripod with a screw less than
5.5 mm (7/32 inches) long. Otherwise,
you cannot firmly secure the camera, and
damage to the camera may occur.
Notes on the XLR handle unit (supplied)
(ILME-FX30 only)
• Before connecting/disconnecting an
external microphone or device to/from
the INPUT1 or INPUT2 jack, be sure to
set the INPUT1 (LINE/MIC/MIC+48V)
or INPUT2 (LINE/MIC/MIC+48V) switch
to a position other than "MIC+48V."
Plugging/unplugging the cable into/
from the external microphone or device
while the switch is set to "MIC+48V"
may cause loud noise or a malfunction
of the device.
• While recording is in progress,
operating and handling noises from
the camera or lens may be recorded.
Touching the handle while recording
is in progress will cause noise to be
included in the recording.
• While recording is in progress, do not
change the INPUT1 or INPUT2 switch
settings.
• If the microphone of the handle is
in proximity to a speaker, acoustic
feedback may occur. In this case, move
the handle away from the speaker to
allow the maximum distance between
the microphone and the speaker, or
lower the speaker volume.
• If dust or water droplets are present
on the surface of the microphone,
successful recording may not be
possible. Be sure to clean the
microphone surface before using the
handle.
EN
10
• Turn off the camera before attaching/
removing the handle.
• When the handle is connected
to the camera and the
HANDLE AUDIO ON/OFF switch is set
to ON, the internal microphone of the
camera cannot record audio input.
• When attaching the handle to the
camera, fasten the two handle-
attachment screws securely. Using the
handle without fastening the handle-
attachment screws may damage the
Multi Interface Shoe terminal or cause
the handle to fall off.
Sony lenses/accessories
Using this unit with products from
other manufacturers may affect its
performance, leading to accidents or
malfunction.
Warning on copyrights
Television programs, films, videotapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the provisions of the
copyright laws.
Notes on location information
If you upload and share still images or
movies taken with this camera on the
Internet while the location information
is linked with the dedicated smartphone
application, you may accidentally reveal
the location information to a third party.
To prevent third parties from obtaining
your location information, deactivate the
[Location Information Linkage] function
of the dedicated application.
Notes on discarding or transferring this
product to others
Before discarding or transferring this
product to others, be sure to perform the
following operation to protect private
information.
• Select [Setting Reset]  [Initialize].
Notes on discarding or transferring a
memory card to others
Executing [Format] or [Delete] on
the camera or a computer may not
completely delete the data on the
memory card. Before transferring a
memory card to others, we recommend
that you delete the data completely using
data deletion software. When discarding
a memory card, we recommend that you
physically destroy it.