Functional Characteristics; Operation - Waves DH-103211 Bedienungsanleitung

FUNCTIONAL CHARACTERISTICS

1. CONTINUE
2. OFF
3. NOTMAL
4. RUNNING LAMP
5. WATER FULL LAMP (When the water tank is full ,the full tank lamp will light up, the dehumidifier will
6. DEFROST LAMP
defrost process , the indicating lamp will light up )

OPERATION

1. Ensure that the unit is connected to the power socket.
2. Make sure the water tank is placed in proper position (After plug on the machine for first time , if the water full
tank lamp light up , just pull out the water tank then push it back to the proper position)
3. Turn clockwise the humidity control knob to the suitable humidity (usually at normal position) If the humidity
indoor is over the set humidity, then the machine will start removing moisture..
Please turn the humidity control knob to the position of "continue" to make the machine works continuously
when exploded to a high humidity environment.
4. When the humidity in the room reached the set humidity then the machine will stop operating.
5. When the humidity in the room is over the set humidity then the machine will start removing moisture again.
6. The circulation between point 3,4,5 is controlled by the set humidity.
( Dehumidifier continuously removing moisture)
( Dehumidifier stop removing moisture )
(Humidity control between 50%-60%)
( When the lamp lights up which means dehumidifier is operating)
Stop operating immediately)
(When operating under low temperature for a short period, the dehumidifier will starting