Safety And Maintenance Instructions; Technical Data - ratiotec CONNECT Pager Bedienungsanleitung

EN

Safety and maintenance instructions

Before commissioning, please check all components for
damage and only use the supplied components.
When stacking multiple pagers, please pay attention to the
silver contact screws and the correct placement of each pag-
er, so that all pagers can be charged successfully. No more
than 10 pagers should be placed on one pager base.
Attention
The included power supply delivers 6V / 2A and is only
intended for charging the pager set. Please do not use it to
charge smartphones, laptops, etc.

Technical data

Pager
Voltage: 6V
Charging current: max. 100 mA
Battery capacity: 350 mAh
Signal units: vibration, acoustic and optical signal (LED)
Others: button in the middle
Charging station / pager base
Voltage: 6V
Charging current: max. 1A
7