Inhaltszusammenfassung für HEIDENHAIN ECI 1319 EnDat22
Seite 1
Mounting Instructions Montageanleitung ECI 1319 EnDat22 Special application: Adjusting washer DIN 988 Sonderanwendung: Montage mit Passscheiben DIN 988 EQI 1331 EnDat22 WELLA1: 44A, 44C FLANA1: 0YA 5/2013...
Seite 2
Notes . Hinweise Reference for Product Information (D1038137, D1000353), Mounting instruction (D1033989, D1000453). Hinweis für Produktinformation (D1038137, D1000353), Montageanleitung (D1033989, D1000453). Mounting surfaces, mating shaft with thread, screw and adjusting washers DIN 988 must be clean and free of grease. Maximum thickness of adjusting washers DIN 988: = 0.5 mm.
Seite 3
Mounting . Montage Screw assembly must be completed within 5 minutes! The curing time for the materially bonding anti-rotation lock of the screws supplied by HEIDENHAIN is 6 hours. Schraubenmontage muss innerhalb von 5 Minuten abgeschlossen sein! Die Aushärtezeit der stoffschlüssigen Losdrehsicherung der Schrauben aus dem Lieferumfang von HEIDENHAIN beträgt 6 Stunden.
Seite 4
DR. JOHANNES HEIDENHAIN GmbH Dr.-Johannes-Heidenhain-Straße 5 83301 Traunreut, Germany { +49 8669 31-0 | +49 8669 5061 E-mail: info@heidenhain.de Technical support | +49 8669 32-1000 Measuring systems { +49 8669 31-3104 E-mail: service.ms-support@heidenhain.de TNC support { +49 8669 31-3101 E-mail: service.nc-support@heidenhain.de...