Bluetooth Pairing; Safety Tips - tribit MoveBuds H1 Benutzerhandbuch

EN|04
MoveBuds H1 Indicator Light Instruction
Power ON/OFF: The white indicator will flash for one

Bluetooth Pairing:

while in pairing mode.
Connection Successful:
Re-connecting: The white indicator breathes slowly.
Low Battery:
Charging Instruction
Charging the MoveBuds H1
Place the MoveBuds H1 back into the charging case and close the cover to start
successfully charging.
It takes about 90 minutes for the MoveBuds H1 to fully charge.
Charging the Charging Case
The charging cases indicators will breathe during charging, producing a solid glow.
The MoveBuds H1 charging case takes 120 minutes to charge fully.
Reset
To reset the MoveBuds H1, place the MoveBuds H1 back into the charging case and
twice to indicate a successful reset.
your previously connected device and search for earbuds again to reestablish a
connection.

Safety Tips

1. Do not dismantle or modify the MoveBuds H1 for any reason. The warranty will not
2. The opening and closing edge of the charging case is much sharper than other
positions. Please be careful when you open / close its cover to avoid scratches.
may cause damage to your device.
5. The MoveBuds H1 contains small components. Please keep them away from
children to avoid accidental swallowing or other injuries.
6. It is recommended not to use the MoveBuds H1 when driving as it is illegal in
some regions. Please check and abide by the local laws and regulations on the use
of headphones. Please stop listening using the MoveBuds H1 if you are distracted
by audio devices when driving or engaging in activities that require complete
concentration.
7. The MoveBuds H1 and the charging case contain magnets. The magnetic fields
medical equipment. Please
keep a safe distance between your medical equipment and the product.
However, the earbuds may still cause ear infections if not properly cleaned. Please use
Cautions
1. The MoveBuds H1 may sound lower than the actual volume in a noisy environment.
3. Please charge the MoveBuds H1 with the provided charging cable and power
adapter/computer. Only use an adapter that complies with your country/region's laws
and international and regional safety standards.
4. Using the MoveBuds H1 in dry seasons or regions may easily cause static electricity
accumulation. You may feel a small amount of static electricity discharge from the
earbuds. Please avoid using it in dry environments to reduce the risk of electrostatic
discharge. As an extra safety measure, before using the MoveBuds H1, users may touch
a grounded item or unpainted metal object to discharge any stored up static electricity.
the actual usage conditions. It's not recommended to immerse the earbuds in water
for a long time or wear them for swimming, bathing, or other water sports that may
lead to damages to the earbuds, or the warranty will be invalid.
EN|05