Meec tools 020715 Bedienungsanleitung Seite 53

when the switch is in the ON position increases the risk of
accidents and injuries.
• Remove adjuster keys/spanners before switching on the
power tool. Spanners or the like that are left in a rotating
part of the power tool can cause personal injury.
• Do not overreach. Always maintain a firm footing and good
balance. This ensures better control over the power tool in
unexpected situations.
• Wear suitable clothing. Do not wear loose-fitting clothing or
jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose-fitting clothing, jewellery and long hair
can get caught in moving parts.
• If dust extraction and dust collection equipment is available,
this should be connected and used correctly. The use of such
devices can reduce the risk of dust-related problems.
• Do not allow familiarity with similar tools to lead to
exaggerated self-confidence and to neglect the safety
instructions for the tool. A moment of inattention or
carelessness can result in serious personal injury.
USING AND LOOKING AFTER POWER TOOLS
• Do not force the power tool. Use the correct power tool for
the planned work. The tool does the job better and more
safely when used at the rate for which it was designed.
• Do not use the power tool if it cannot be switched on and off
with the power switch. Power tools that cannot be controlled
with the power switch are dangerous and must be repaired.
• Pull out the plug and/or remove the battery before making
any adjustments, changing accessories or putting the power
tool away. These safety precautions reduce the risk of
accidentally starting the power tool.
SV
53