Troubleshooting; Resetting The Keypad; Replacing The Battery; Code Entry Error - simu DIGICODE HZ 2C Installationsanleitung

DIGICODE HZ 2C

Troubleshooting

Resetting the keypad

Press RESET at the rear of the keypad until the keypad emits a sound and both indicator lights go out.

Replacing the battery

If the battery is low, the indicator lights flash
more slowly and the keypad no longer emits
any sounds in order to preserve the battery
for as long as possible.
If the indicator lights do not come on when a
button is pressed, the keypad battery needs
to be replaced.
Battery specifications: 3V CR2450.

Code entry error

Beginning of code entry incorrect
Continue by entering the right code and confirm by pressing a control button. Only the last digits entered will be registered.
©
30 Copyright
2022 SIMU SAS. All rights reserved.