Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TOPCOM Multi Steamer 401
5.3
Warming a baby bottle using the cook function
•
Remove every accessory from the main unit, including the steamer bowl
•
Use the enclosed measuring cup to measure 150ml water.
•
Pour the 150ml water into the water reservoir
•
Position the steamer cover
the steamer bowl.
•
Put the baby bottle with milk into the gap on top of the steamer cover
•
Press the On/Off button
•
Press the Warm up button
•
Press the temperature increase button
70°C.
•
The water will warm up to 70°C and this will heat the baby bottle.
Changing the cook temperature will influence the warming time. The
higher the temperature, the quicker the bottle will warm.
•
After about 10 minutes, the milk in the baby bottle warmer will be ready.
•
Press the Clear button
•
Remove the bottle from the warmer using the enclosed bottle pincers.
Always check the food temperature by testing some on the back of your hand.
•
Disconnect the power after use.
5.4
Keep warm function
Once you have warmed your baby bottle or food, you can keep it warm at 40°C. (40°C)
•
Make sure that there is 150ml water in the water reservoir
•
Position the steamer cover
•
Put the baby bottle with milk into the gap on top of the steamer cover
•
Press the On/Off button
•
Press the Keep Warm button
temperature on the right temperature until the bottle is needed.
•
Disconnect the power after use.
Do not keep the bottle longer warm than 1 hour.
Always check the food temperature by testing some on the back of your hand.
The keep warm function can also be used for keeping baby food at 40°C.
6
Technical data
Power supply
Rated power
Temperature
7
Cleaning
•
Disconnect the device and allow it to cool down.
•
Clean it with a soft cloth or slightly damp sponge.
•
Never allow that water or any other liquid enters the device or accessories.
•
Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
•
The plastic components are not suitable for use in a dishwasher.
6
without the removable steamer cover lid
4
. The display will indicate the temperature.
13
to start the warming process.
14
to set the temperature to minimum
9
.
12
without the removable steamer cover lid
4
. The display will indicate the temperature.
13
. This will set the temperature to 40°C and keep the baby bottle
15
.
2
.
2
220-240 V/AC / 50 Hz
300 W
37°C - 100°C (+/- 5°C)
.
3
on
5
.
4
on the steamer bowl.
5
.
4
TOPCOM Multi Steamer 401
Werbung
Inhaltsverzeichnis
