2c) Individuelle Tastatursperre
– Sperren und Lösen der jeweiligen Taste über
kurzen bzw. langen Tastendruck. Setzen
der Funktion über der Taste durch kurzer
Tastendruck, unter der Taste durch langen
Tastendruck.
– Zum Verlassen Taste ON/OFF kurz drücken.
Wert wird gespeichert
=> Einstellung für Auto OFF erscheint in der
Anzeige.
Hinweis:
Wenn keine Änderungen erfolgen, weiter mit
Taste
2d) Auto OFF einstellen
– Taste
kurz drücken
=> 1. Stelle der Eingabe blinkt
– Taste kurz drücken
=> 2. Stelle der Eingabe blinkt
– Taste
kurz drücken
Eingabewert erhöht sich bei jedem Tastendruck
(0.1.2 . . . . 9), max. 999 Minuten einstellbar
– Taste ON/OFF kurz drücken
Wert wird gespeichert
Hinweis:
Wenn keine Änderungen erfolgen, weiter mit
Taste
Hinweis:
Um Batterieenergie zu sparen, wird empfohlen,
die Auto OFF-Einstellung des Messgerätes zu
nutzen.
Individuelle Tastatursperre
Individual Key Lock
2c) Individual Key Lock
–
To lock and unlock individual keys. Press the
respective key either with a short (press &
release) or long (press & hold). Set the function
on a key with a short pressing oy the key for the
function above the key, for the function below
the key press and hold the respective key.
–
To exit, briefly press the ON/OFF key. Value will
be stored
The setting of the Auto OFF appears in the
display.
Note:
When there are no further adjustments are to be
made, press the key
2d) Set and adjust the Auto OFF
–
Shortly press the
The 1st input position will flash
–
Shortly press the key
The 2nd input position will flash
–
Shortly press the
The digit will increase, each time the key is
pressed (0.1.2 . . . . 9), max. 999 minutes
selectable
–
Shortly press the ON/OFF key
Value will be stored
Note:
When there are no further adjustments are to be
made, press the key
Note:
In order to save battery power, it is recommanded
to use the Auto OFF setting of the measuring
instrument.
Auto OFF einstellen
Set and adjust the Auto OFF
Seite 8
key
key