General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - HENX H36LJ16 Bedienungsanleitung

English
b. If the chainsaw's built-in overload
protection switch frequently trips,
contact HENX Customer Service or
your Closest service centre.
Do not wash the chainsaw with a hose;
c.
avoid getting water in the motor and
electrical connections.
d. Remove the battery and store the
idle chainsaw in a covered area when
not in use. Allow the motor to cool
before storing it in any enclosure. The
chainsaw should be stored in a dry,
high, or locked-up enclosure, out of
reach of children.
When servicing, use only identical
e.
replacement parts listed in this manual.
Use of parts that do not meet the
original equipment specifications may
lead to improper performance and
compromised safety.
Remove or disconnect the battery pack
f.
before servicing, cleaning, or removing
material from the chainsaw.
g. Follow instructions for lubricating and
changing accessories.
h. Keep handles dry, clean and free from
oil and grease.
Keep all nuts, bolts, and screws tight to
i.
be sure the equipment is in safe working
condition.
Never remove or tamper with safety
j.
devices. Regularly check their proper
operation. Never do anything to
interfere with the intended function of a
safety device or to reduce the protection
provided by a safety device.
Always stop the motor before making
k.
adjustments to a wheel or a cutting-
height adjustment.
After striking a foreign object, stop the
l.
motor, remove the battery pack, allow
the wire to stop rotating, and thoroughly
inspect the chainsaw for any damage.
Repair the damage before operating the
chainsaw.
m. Maintain or replace safety and
instruction labels, as necessary.
SAVE THESE INSTRUCTIONS.
20
Refer to them frequently and use them to
instruct others who may use this tool. If
you lend this tool to someone else, also
lend these instructions to them to prevent
misuse of the product and possibly injury.
4. General Power Tool Safety
Warnings
WARNING: Read all safety warnings and
instructions. Fail to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warning refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.

Work Area Safety

4.1
• Keep work area clean and well lit
cluttered or dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while
operating a power tool distractions can
cause you to lose control.

Electrical Safety

4.2
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adaptor plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock
• Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
• Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
• Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.