Eas Y Setu P - Heimplanet FISTRAL Beschreibung

FISTRAL DESCRIPTION

EAS Y SETU P

START
Unpack tent and Lay out flat on
accessories the ground
CLOSE ( x1)
Disconnect the pump Use the punch clips
and make sure all to separate the air
valves are properly beams
closed
DI SASSEMBLY
01 RELEASE THE PUNCH CLIPS
02 OPEN ALL VALVES (x2)
03 FOLD BOTH SIDES
lengthwise towards the center axis. Remember to
remove excess air from the struts by pressing it out
after each fold.
LAY OUT 03 CLOSE ( x2)
SECURE ( x1) PEG THE
FRONT
Apply only light
pressure to the guy
line
OPEN ( x1)
Connect the pump to
the adapter
PEG THE
REAR SIDES
Apply only light
pressure
04 ROLL IT UP INTO A SMALL PACKAGE
Start at the end without valves and roll towards the
other (roll it once to remove most of the air, then a
second time to remove the rest of the air).
05 PUT IT BACK IN THE TENT BAG
Once in the bag, you can further compress the package.
P.NR.
INFLATE
Inflation is quick -
tent pitches itself
TIGHTEN
Use the guy line
adjusters to apply
moderate tension to
all anchor points