Duramaxx Eyeview IP Bedienungsanleitung Seite 27

Note: If you experience any problems or connection errors, go back to step
3 or press and hold Reset for 5 seconds to start connecting again.
Step 6
Tap on "Apply". The camera will
restart and then automatically
connect to your local WiFi. The
connection setup is complete as
soon as the blue LED lights up
continuously. This process can take
about a minute.
Step 7
Close and restart the app to
complete the connection. The
process can take a few seconds.
The icon will show "active" once the
connection is successful. Tap the play
icon to start live streaming.
EN
27