PEIKER CEE Ceecoach M-11 Bedienungsanleitung Seite 10

Connecting to Bluetooth accessories (e.g. headset)
Connect a smart phone:
Set the device into pairing mode by pressing the Plus (+) and the Minus (-) buttons simutaneously. Activate Bluetooth
your smartphone and scan for Bluetooth devices. The device is shown on the mobile phone as CEECOACH including the
last 4 characters of the serial number, which can be found on the back side of the device. Click or tap the device to establish
a connection. An incoming call is announced by CEECOACH and accepted by pressing the Middle button (o) once. Double
clicking the Talk button (o) terminates the call. Pressing the Talk button (o) again puts the device back into participant
mode. If you do not wish to accept a call, click the Middle button (o) twice - and the participant mode will be retained.
CEECOACH 2 only: Connect Bluetooth headset or loudspeaker
Attention: As long as no Bluetooth headset is paired you can hear audio prompts from CEECOACH through the provided
corded headset only. Set your CEECOACH and your headset (or loudspeaker) into pairing mode. Please consider manuals
and audio prompts of your respected devices. Recommended and tested headsets are offered in our online shop www.
peiker-cee.com. Further, you can use all headsets supporting the "Bluetooth
free Profile". However, we can not guarantee faultless functioning with all headsets. With CEECOACH 2 you can pair a
smartphone in addition to your Bluetooth headset (see above).
1.
s imultaneously
10
2.1. ®
2.2 Set your Bluetooth
accessories int o
® Headset Profile" and "Bluetooth
3.1. Turn
CEECOACH
3.2 For headsets: Pay attention to audio
for a signal that connection is established successfu l
4.1. Select CEECOAC H
CEECOACH
Made in Germany
CEECOACH
XXXXXXX
SN: XXXXX 2 53
XXXXXXXX
®
on
® Hands-
CEECOACH
2 53