Getting Started - Remington NE8000 Bedienungsanleitung

GETTING STARTED

INSERTING BATTERIES (FIG. B)
• Your NE8000 requires 1 'AA' alkaline battery (first one included).
1. Ensure the product is switched off.
2. Slide the battery/storage compartment cover off.
3. Open the battery cover.
4. Insert the battery so that the (+) and (-) marks on the battery correspond to the marking
on the battery cover.
5. Refit the battery cover.
6. Slide the battery/storage compartment cover back on.
• Note: your trimmer will not work if the battery is not inserted correctly.
• Note: remove the battery if you are not going to use your trimmer for long periods.
TURNING ON THE TRIMMER
• Slide the On/Off switch to switch your trimmer on or off.
CHANGING ATTACHMENTS (FIG. A)
• Ensure your trimmer is switched off.
• Remove the attachment by turning it anti-clockwise and lifting off.
• Fit the new attachment by placing it on the top of your trimmer and turning it clockwise
to lock it into position.
• The markings on the attachment, and the body of your trimmer show the correct
alignment.
INSTRUCTIONS FOR USE
• Always remember to turn the trimmer on before you insert it into your nose or ear to
avoid injury.
TO REMOVE HAIR FROM NOSE
• Fit either the linear or rotary trimmer attachment.
• Insert it gently into the nostril.
• Gently move it in and out of your nostril and at the same time rotate it.
• Avoid inserting it more than 6mm into your nostril.
TO REMOVE HAIR FROM EYEBROWS
• Fit the linear trimmer attachment.
• Remove the comb from the battery/storage compartment.
• Slide the comb over the trimming head (fig. C).
• Gently guide the cutting unit to stray, unwanted hairs along the eyebrow line or
protruding from the eyebrow itself.
• To remove the hairs completely, remove the attachment comb and lower the trimmer
onto the skin and move over desired area.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
RS
UA
BG
AE
5