Werbung
Verfügbare Sprachen
Verfügbare Sprachen
obstructions. Actual transmission range will vary depending on what is in the path of the signal.
Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in
half.
TO SET CALENDAR, 12/24 TIME AND TIME
1.
Press and hold SET / ALM SET for 2 seconds, time digits change to year "2008 YR"
and flash. Press + / - to set year.
2.
Then press SET / ALM SET once again, month digits flash. Press +/- button to set
month.
3.
Then press SET / ALM SET once again, date digits flash. Press +/- button to set
date.
4.
Press SET / ALM SET once again, time digits change "24 Hr", press +/- to select "12
Hr" time format or "24 Hr" time format. When "12 Hr" is selected, AM / PM icon will
be displayed.
5.
Then press SET / ALM SET once again, time digits "0:00" show up and the hour
digits flash. Press +/- to set the hours.
6.
Then press SET / ALM SET once again, minute digits flash. Press +/- button to set
the minutes.
7.
Press SET / ALM SET to return to normal mode, or it will return to normal mode in
around 8 seconds if no press of any other buttons.
TO SET ALARM TIME
Press SET / ALM SET once, time digits change to alarm time digits "AM 7:00 AL". Then press
and hold SET / ALM SET for 2 seconds, the hour digits flash. Press +/- to set your desired
hours of alarm time.
Press SET / ALM SET again, alarm minute digits flash. Press +/- to set alarm minutes.
Press SET / ALM SET again, time digits change to "05" and flash. Press +/- to set the snooze
duration from 1 to 20 minutes.
Press SET / ALM SET to return to normal mode, or it will return to normal mode in around 30
seconds if no further press of any other buttons.
TO TURN ON OR OFF YOUR ALARM
Press SET / ALM SET once to display the alarm time. When alarm time is displayed, press + to
turn on / off the daily alarm. When the alarm function is turned on, the
between the hour and minute digits.
TO USE SNOOZE ALARM
When time reaches your set alarm time, your clock will give beep sound to wake you up. The
icon will flash.
1)
Press SNOOZE once to stop the alarm temporarily, the
alarm will beep again in 5 minutes.
2
icon appears
icon keeps flashing. The
Werbung
Fehlerbehebung
