Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
1. Mode COOL:
•
When the device is on or the timer is activated, press MODE repeatedly until the COOL mode is
selected. At this time the mode indicator light is displayed.
•
Press ▲/▼ to set the appropriate temperature in the range of 16-32°C.
•
Press the SPEED key to choose the High/Low speed.
NOTE: The air conditioning stops if the temperature in the room is lower than the selected temperature.
2. Mode FAN:
•
When the device is on or the timer is activated, press MODE to select FAN mode. At this time the
corresponding indicator light will be activated.
•
Press the SPEED key to select the High/Low speed.
•
In FAN mode, the air in the room is circulated but not cooled.
3. Mode DRY:
•
When the device is on or the timer is activated, press MODE to select the DRY mode. At this time
the corresponding indicator light will be activated.
•
The temperature and speed are not adjustable.
•
The user must connect the hose to the drainage outlet on the bottom of the unit.
4. Mode HEAT:
•
When the device is on or the timer is activated, press MODE repeatedly until the HEAT mode is
selected. At this time the mode indicator light is displayed.
•
Press ▲/▼ to set the appropriate temperature in the range of 16-32°C.
•
Press the SPEED key to choose the High/Low speed.
NOTA: The drainage hose must be connected to the unit for continuous operation.
5. Mode SLEEP:
•
It can be activated when in COOL mode.
•
In COOL mode: After 1 hour the preset temperature is increased by 1°C, after another hour it will
be increased by 1°C again.
•
In HEAT mode: After 1 hour the pre-set temperature is reduced by 1°C, after another hour it will
be reduced by 1°C.
•
The selected temperature will be maintained for 10 hours and the indicators will darken. The fan
speed in this mode can be changed to low speed for silent operation.
6. Mode TIMER:
•
In standby mode, press the TIMER button to set the power on time. Press the ▲ and ▼ keys to set
the switch-on time (0~24H).
•
In the ON state, press the TIMER key to set the switch-off time. Press the ▲ and ▼ keys to set the
time (0~24H).
•
To cancel the timer press ▲ and ▼ repeatedly until the timer shows "00". Pressing POWER also
exits the timer setting.
Mc HAUS
artic-260
Werbung
Inhaltsverzeichnis
