Adjusting The Brake - Windgoo M12 Bedienungsanleitung

1. Turn on the power and check the power indicator
2. Scooter boosting: slide the scooter with your foot 1-2 meters, then press the accelerator
for running
3. To slow down: simply release the throttle button, use the brake handle on the left for
stronger braking
4. To change direction: lean slightly to the left or right and turn the handlebars slightly
Folding
Fold Opening
To fold: Make sure that the electric scooter is turned off, open the pole lock,push down the
base pole and fix the folding hook to the folding lock.
To unfold: Press the folding hook to release and follow the folding step reversely to unfold
the E-scooter.

Adjusting the brake:

1.Use the M5 hex wrench anticlockwise to release the
plate screws on back wheel, adjust the length of
exposed tail, shorten for tightening and lengthen for
loosing the brake.
2.Lock the pressure plate screws by rotating clockwise.
Fix the handle:
If your standpipe in the electric scooter is shaking, please use the M5 hex wrench to lock
the two screws at the folding mechanism.
Inflate the tires:
1.Remove the front and rear tire inflatable mouth cap.
07