Scope Of Delivery; Installation; Unpacking The Machine; Setting Up The Machine - Würth ORSY mat DR Betriebsanleitung

Item Description
1 Master module incl . control
2 Barcode scanner incl . USB cable
3 Key for drawer/emergency unlocking
4 Covering panel for the underside of the body
5 Mobile radio antenna
6 Power adaptor (12 V/DC)
7 Test report of body
8 Lacon test report
9 IEC connector
10 Glass layer slides for grip
(number may vary depending on the number of drawers)
Item Description
1 Satellite module
2 Key for drawer/emergency unlocking
3 Covering panel for the underside of the body
4 CAN cable (already connected)
5 Power adaptor (12 V/DC)
6 Test report of body
7 Lacon test report
8 IEC connector
9 Glass layer slides for grip
(number may vary depending on the number of drawers)
The installation and the subsequent maintenance work must be carried out by a qualified technician, who is
familiar with the machine and its safety .

4.1 Unpacking the machine

After removing the packaging, check whether the machine is intact . In case of any doubt, do not use the
machine . The packaging materials should be disposed of by authorized specialized companies and used
further .

4.2 Setting up the machine

Do not set up the machine outdoors, rather set it up in closed spaces with temperature between 5°C and
34°C . The relative humidity should not exceed 65% .
Do not install it in areas, where water jets are used for cleaning purposes. The vending machine should also
not be exposed to any liquid mists and liquid vapours .
24
3 SCOPE OF DELIVERY
Master module
Satellite module
4 INSTALLATION
Quantity
1
1
2
2
1
1
1
1
1
X
Quantity
1
2
2
1
1
1
1
1
X