Ambient Conditions; Supply Voltage; Power Supply Cable - Würth ORSY mat DR Betriebsanleitung

2.2 Ambient conditions

Operation is permitted only in indoor areas . The machine should be protected from moisture, rain or splash-
ing water .
Permissible ambient conditions for the operation:
Ambient temperature
Relative humidity
Altitude
Degree of contamination
Permissible ambient conditions for the transport:
Ambient temperature
Relative humidity

2.3 Supply voltage

Only power adaptors approved by the manufacturer should be used to power the machine . In particular,
ensure that the following specifications are met.
Input voltage
Output voltage
Output current/
Output power
Power adaptor
Connector for power
input
Plug 12 V outlet

2.4 Power supply cable

Depending on the place of use, the power adaptor can be connected to the respective regional power sup-
ply connectors with different connecting cables . There is an IEC60320-C14 socket (IEC socket with 3 poles)
on the power supply unit for this purpose .
Only cables that comply with IEC 60320 may be used .
Minimum cross-section in mm²
Minimum cross-section in AWG
Max . length
85 ∼ 264 V/AC, 47–63 Hz
12 V/DC (+/– 3%)
9.78 A / 118 W
Only the power adaptor provided by the
system supplier should be used
IEC60320-C14 socket
Circular connector, 3 poles, push-pull,
20 mm diameter
+5°C to +35°C
0–85% (non-condensing)
Max . 2000 m above sea level
2
–10°C to 45°C
0–85% (non-condensing)
0 .75 mm²
18 AWG
3 m
23