Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Storage
1.
Before long term storage, wash the attachment
with mild detergent and water to remove dirt and
grime.
2.
Check the condition of the cutting edge. Remove
and rotate the blade 180 degrees so the worn
edge is on top, if it is badly worn.
3.
Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is damaged or
worn.
4.
Paint all scratched or bare metal surfaces.
Note:
Paint is available from your Authorized
Service Dealer.
5.
Store the attachment in a clean, dry garage or
storage area. Cover it to protect it and keep it
clean.
11
Werbung
Inhaltsverzeichnis
