Manual - MODSTER Ultralight
2.2 Introduction of the button functions
Speed switch
The scooter has 3 different levels: Level 1, Level 2 and Level 3!
The lowest speed level is level 1.
The highest speed level is level 3.
You can select the desired level by pressing the button to increase the speed (+) or the button
to decrease the speed (-).
On/Off button
Press the on/off button for longer than 2 seconds to switch on the e-scooter.
Press again for longer than 2 seconds to switch the e-scooter off.
Switch for the desired display
Your LED display can show you the following:
State of charge, speed, mileage, voltage and time.
You can determine the content by briefly pressing the on/off button
TRIP = Daily mileage
VOL = Voltage in volts
TIME = Power-on time
ODO = Totoal mileage
Brake and throttle lever
Press the brake button to decelerate.
Press the acceleration button to accelerate.
Lights
If you press and hold the on/off button, above the front light, for a longer period of time, you
can turn on the light.