HOMCOM 440-026 Montage-Und Sicherheitshinweise Seite 20

CAUTION!
The height of the hitch clamp shall not exceed 15.5" (400
mm) above a road surface and the standard drawbar load
shall be between 30N and 80N. The hitch arm must not bear
any extra load.
WARNINGS!
Ensure the safety pin is secured with the spring clip. Please
ensure your bike is completely compatible with the trailer. The
safety strap must be in place before use.
If the hitch arm interferes with your bike or other bike
attachments, or if it does not tighten securely, do not use. Contact
your bike dealer for help with proper installation.
ATTACHING AND REMOVING JOGGER/STROLLER
The jogger/stroller conversion kit consists of a push bar and
front wheel assembly that attach on the trailer to convert it for
walking use.
Install the push bar by inserting ends into frame and pushing
down until locking devices snap into place. Insert the front
wheel assembly into the bracket and firmly tighten the knob.
The front wheel is equipped with a FREE/LOCK mechanism
that the wheel can be switched into LOCK position for jogger
and FREE position for stroller. Push the red knob forwards
and downwards to lock the wheel for Jogger. Pull the red
knob upwards and backwards to release the wheel for stroller.
19