Sleep Mode; Care And Maintenance; Battery Safety Instructions - Levenhuk Wezzer Tick H50 Clock-Thermometer Bedienungsanleitung

•
Press the SET button to enter custom times for the Night mode.
The setting order: Start hours > Start minutes > End hours > End minutes.
NOTE! Auto mode and Night mode cannot be selected simultaneously.
FM radio
•
Press the RADIO/SLEEP button to turn on the radio.
•
Press the SET button to automatically search for and save radio stations. When the search is complete, the screen will show "01"
and the device will play the first radio station. Press the UP/PROJECT or DOWN buttons to play the other saved radio stations.
•
Press the VOL button, and then press the UP/PROJECT or DOWN buttons to change the volume from minimum (the screen will
show "L00") to maximum (the screen will show "L15").
•
Press the SNZ/LIGHT button to turn the radio off.

Sleep mode

•
Press the RADIO/SLEEP button twice to activate the sleep mode. The radio will play for the selected time span and then will
automatically turn itself off.
•
Press the RADIO/SLEEP button to select the desired time span (from 5 to 90 minutes).
•
Press the RADIO/SLEEP button twice in normal mode to check the remaining time before the radio stops playing.
Specifications
Air humidity, units of measurement
Operating humidity range
Temperature, units of measurement
Operating temperature range
Time format
Radio frequency range
Snooze time
Screen
Power supply
USB cable
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Take the necessary precautions when using the device with children or others who have not read or who do not fully understand
•
these instructions.
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local
•
specialized service center.
Protect the device from sudden impact and excessive mechanical force.
•
Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open fire, and other
•
sources of high temperatures.
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
•
Only use accessories and spare parts for this device that comply with the technical specifications.
•
Check this device and its cables and connections for any possible damage before use.
•
Never attempt to operate a damaged device or a device with damaged electrical parts! Damaged parts must be replaced
•
immediately by an authorized service agent.
If a part of the device or battery is swallowed, seek medical attention immediately.
•
Children should use the device under adult supervision only.
•

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries
at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the
device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries
from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries
as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble
batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation,
or poisoning. Utilize used batteries as prescribed by your country's laws.
% (RH)
20... 95%
°F, °C
0... +50°C (+14... 122°F)
24 hours, 12 hours
76... 108MHz
5... 60min.
LED mirror display
1pc CR2032 battery (210mA∙h), AC/DC adapter 5V 1000mA
1.5m (4.9ft.), included
5