Max ULTIMATE 3 Benutzerhandbuch Seite 7

MAX ULTIMATE 3 PEDICURE DUST COLLECTOR
USER'S GUIDE
General description
The MAX Ultimate 3 dust collector is designed to be integrated into the foot
stand. It is used for removing dust and skin particles that appear during the
pedicure process.
Complete set
1. Dust collector with a filter bag installed.
2. Additional filter bag.
3. Passport.
Operational principles
The manicurist works in the dust collector fan grill area. The dust-air mixture is
sucked with the fan impeller of the dust collector. Clean air flows back into the
room after its filtration through the bag filter. Dust is collected inside the filter.
The manicurist cleans the filter bag after finishing.
Installation of the dust collector
1. Loosen the fasteners and pull out the top of your pedicure stand along with
a pillow.
2. Turn its soft part down. Remove the fasteners that fix the lower metal and
upper soft part of the stand.
3. Insert the dust collector so that during reinstallation it would be installed with
the fan facing down. Center it to be symmetric with respect to your stand.
Put the metal part on it and mark the holes in the mounting part of the dust
collector (rectangular in shape).
4. мDrill holes. Reassemble the stand using standard fasteners of the stand. If
necessary, use longer fasteners (not included).
ENG
HOW TO INTEGRATE THE PEDICURE DUST
COLLECTOR?
Watch the video youtu.be/JVW--Rzg_Q8
QR code link
How to enable the subtitles in the video:
• Press the gear wheel symbol and in the drop down menu click
Subtitles.
• In the next menu you can choose the language of subtitles
7