Parts And Components; Before Use; Installation - cecotec bolero COOLMARKET TT 90 BLACK Bedienungsanleitung

1. PARTS AND COMPONENTS

Fig. 1 (*)
1. Freezer compartment
2. Thermostat
3. Upper shelf
4. Lower shelf
5. Crisper drawer
6. Door shelves
(*) The graphics in this manual are schematic representations and may not exactly match the
product.

2. BEFORE USE

- This product includes a safety package to protect it during transport. Unpack the appliance
and keep the original packaging and materials in a safe place. It will help prevent any
damage if the product needs to be transported in the future. In case the original packaging
is disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
- During transport, hold the base and lift the refrigerator carefully at an angle of less than
45 degrees. Never use the door handle as support. Do not place the device upside down or
horizontally. Place the refrigerator on its base by means of the adjustable feet.
Box contents:
- Bolero CoolMarket TT 90 Black/Inox refrigerator
- Ice cube tray
- Ice scraper
- Instruction manual

3. INSTALLATION

Place the device on a flat and solid surface. You should not place it on any soft material.
-
Select a location in which there are no heat sources near. Keep the refrigerator away from
-
direct sunlight and other heat-producing appliances.
Select a dry, well-ventilated location where corrosive air is not present.
-
To improve the refrigeration system efficiency and save energy, you must ensure good
-
BOLERO COOLMARKET TT 90 BLACK / INOX
ENGLISH
41