Iget HOME Benutzerhandbuch Seite 7

EN User's manual iGET HOME Feeder 6L
1. Cover
2. Feed hopper
3. Microphone
4. Bowl
5. Camera (the feeder
6Ldoes not have a
camera)
6. LED indicator
7. Mode change /
Reset button
8. Manual Feed / Lock
Button
9. Power socket
10. Battery
compartment
11. Speaker
Button functions and indications
Mode change / Reset button: To switch to connection mode, hold this button for at least seven seconds until a "drop" sounds
three times, the light will illuminate (red or blue) for six seconds and it will start flashing slowly - the device is now possible
connect to wifi and pair with your phone. Repeat the procedure to return to the factory settings.
Microphone: Press and hold this button to record a message for your pet when dispensing food. The message can be recorded
after the sound described as "drop" is heard. The message can be up to 10 seconds long. Hold down the button during
recording, releasing it and playing two "drops" will end the recording of the message.
Manual Feed / Lock Button: Press briefly to dispense one serving. By pressing it for a long time, again for at least 10 seconds,
you will then lock this feeder function and prevent your pet from feeding the food himself. Locking is confirmed by a double red
flashing of the LED indicator. Then press the same length to unlock the feeder again.
LED flashes red: The feeder is either locked, unlocked or the mode is changed. However, it is usually off.
LED indicator lights up blue: The feeder works as it should.
LED indicator flashes blue: The feeder is waiting to be connected to the mains.
Application connection and device management
To download and install iGET HOME, please scan this QR code:
Automatic feeder for pets