2. LED Light
(1)
Press and hold the power button for two seconds to activate the
device; press the LED button briefly. The LED icon will light up
and the LED will be permanently lit.
(2)
When the LED remains on, a short press of the LED button will
change the lighting mode. The lighting mode can be switched
from one to the other. There are five modes: always on - flashing -
SOS - double red and white flash - off.
(3)
In the always on mode, the brightness can be adjusted by a
long press on the LED button. The brightness can be adjusted.
EN-05
LED Light
LED Light Button
Bulb Symbol