TEMI KIX2 Bedienungsanleitung Seite 8

Before start using the device, please make sure the battery is
charged. For charging, please use the provided magnet charging
cable. The recommended power adaptor current is 5V, 1A. It
takes about 2 hours to fully charge device, please follow the
steps below to the charge.
1.Place the device inside charging
station so that its pins contact the
metal points in the device charging
terminal.
2.Connect the charging cable to the
power source using the USB
connector.
3.Charging animation will display on the device screen
Note: if the device discharged completely then animation of
charging may appear after a few minutes.
Downloading APP for Phone and pair with Device
Note: mobile phone must support Android
4.4 or IOs 8.0 or above and Bluetooth 4.0 or
above. Some application functions may be
invisible in older OS versions of the
smartphone. Scan QT code with mobile
phone to download and install APP or
search, download and install "Glory Fit" APP
from App store or Google Play Store on your smart phone.
While pairing, the phone should be connected to the Internet.
Make sure that the smartphone is set to "Visible to all nearby
Bluetooth devices" when pairing. Pairing the device with the
phone via APP:
1.Activate Bluetooth on your phone
2.Open the application and click "Select device"
3.Click on the name of your device in the device list.
Bluetooth connection between phone and device may
disconnect in some circumstances. The most common of them
are: phone and device are too far from each other(more than 10
meters), there are some walls between them, there are some
7