Tesla SMART SWITCH ZIGBEE/DUAL Schnellstartanleitung Seite 10

2 ADD Devices (ZigBee)
• Press and hold any button of the switch get into Quick Configure Mode.
• Open the App, press and hold any button to get into network pairing mode.
Open the App, on the "Tesla Smart ZigBee Hub" page, click "add subdevice",
and click "LED already blink".
• search nearby device and discover the Tesla Smart Switch Zigbee.
• After adding the device successfully, click "DONE"
• After adding successfully, the product will be displayed on the intelligent
gateway Interface
• Click "Tesla Smart Switch Zigbee" to enter controlling mode.
• Click to enter the switch control interface. Long press the switch button in the
control interface to modify the switch name.
• Press and hold the sketch map of the switch you can modify the name of this
gang of the switch, like "bedroom", "living room".
• Controlling the on/off, setting timer, countdown on the App.
3 Control Switch
• Control switch with APP
10