Autel Smart Controller SE Schnellstartanleitung Seite 4

If used improperly, the aircraft may cause injury and damage to
people and property. Please be cautious while using it. For details,
please refer to the aircraft's disclaimer and safety guidelines.
• Before each flight, make sure that the controller is fully charged.
• Make sure the controller antennas are unfolded and adjusted to
the appropriate position to ensure the best possible flight results.
• If the controller antennas are damaged, it will affect the
performance. Please contact the after-sales technical support
immediately.
• If the aircraft is changed due to damage, it needs to be relinked
before use.
• Make sure to turn off the aircraft power before turning off the
controller each time.
• When not in use, make sure to fully charge the controller every
three months.
• Once the power of the controller is less than 10%, please charge
it to prevent an over-discharge error. This is caused by long-term
storage with a low battery charge. When the controller will not be in
use for an extended time, discharge the battery between 40%-60%
before storage.
• Do not block the vent of the controller to prevent overheating
and diminished performance.
• Do not disassemble the controller. If any parts of the controller
are damaged, contact Autel Robotics After-Sale Support.
4. Item List
NO DIAGRAM ITEM NAME
2
QTY