Maintenance And Cleaning - plastia urbalive BAUM Bedienungsanleitung

English
5) Insert the metal brace (C) into the bottom
of the second flower pot.
6) Then insert it into the substrate of the first flower
pot using this brace.
7) Take the third pot and insert another metal brace (C)
into it. Then insert it into the substrate of the second
flower pot using this brace.
8) The flower pots can be stacked up to a maximum height of 3 pots.
TIP: You can combine the 3 pots to create sets any way you like.
Flower pots can stand individually, as single pots without the need for
a stand. If you stack the flower pots in a set of 3, the stand must be used to
ensure stability. A vertical set may always be made up of a maximum
of 3 pots. We recommend using the base even when stacking 2 pots on
top of each other.
Care for plants and watering
Water the plants with a watering can, ideally in the middle of the flower pot into
the substrate (if the plant is overgrown and watering from above is not possible,
water from the side). When watering a vertical set of potted plants, water in the
top flower pot, either in the middle or over the entire surface.

Maintenance and Cleaning

This product does not require any special maintenance. Wash all parts in warm
water using dish soap, rinse thoroughly and let dry. Protect the product from
direct impacts.
Disassembling
To disassemble the product, reverse the way you have assembled it.
Disposal
Have all of the product components disposed of in an environmentally-friendly
manner. They must be disposal in accordance with the law.
Guarantee
The product is guaranteed for the period of 24 months from the date of purchase.
The guarantee is granted only in eligible guarantee claims, i.e. in the cases of
material od manufacturing defects. The guarantee is claimable only when the
product is used according to the Instructions for use.
7