Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SCRAPER
1
Place the scraper on the tool
and fix it with the clamping screw with
washer 6.
Caution! Make sure the tool is
switched off and unplugged.
PLUNGE SAW BLADE
1
Place the plunge saw blade on the tool
holder
3
and fix it with the clamping
screw with washer 6.
Caution! Make sure the tool is
switched off and unplugged.
SEGMENT SAW BLADE
1
Place the segment saw blade on the
tool
holder 3
and fix it with the clamp-
ing screw with washer 6.
Caution! Make sure the tool is
switched off and unplugged.
SANDING
1
Attach the vacuum tube to the tool and
fix it with the vacuum cable bracket.
Connect the tool to a suitable dust col-
lection system.
Caution! Make sure the tool is
switched off and unplugged.
3
Securely tighten the clamping screw
with
washer 6
with the hex key.
122
EN
holder 3
2
Securely tighten the clamping screw
with
washer 6
with the hex key.
Use the scraper for:
Carpets, coverings.
2
Securely tighten the clamping screw
with
washer 6
with the hex key.
Use the plunge saw blade for:
Wood, plastic, plasterboard, other soft
materials.
2
Securely tighten the clamping screw
with
washer 6
with the hex key.
Use the segment saw blade for:
Wood, plastic, non-ferrous metals.
2
Place the sanding pad on the tool hold-
er 3
and fix it with the clamping screw
with washer 6.
4
Align the holes in the sanding paper
with the ones in the sanding pad and
press the sanding paper into place.
Use the sanding pad for:
Wood, paint.
1
1
1
1
3. 3.
1. 1.
2. 2.
3
2
2
2
2
4
EN
123
Werbung
Inhaltsverzeichnis
