Water Resistance - PEGOUD Premiere GMT Bedienungsanleitung

HOW TO SET SECOND TIME ZONE
1. Pull the crown out to position
[1]-(1st click).
2. Turn the crown anti-clockwise to set
the correct time zone indication
(refer to the 24Hrs. marking on the
outer dial)
3. Push the crown back in the position
[0].
0
1
0
24HRS. INDEX
ON THE
OUTER DIAL
GMT
HAND
4

WATER RESISTANCE

The water resistance indicated on your
timepiece serves only as a guide. Actual
water resistance may vary depending on a
number of important factors including
temperature, water salinity, and actual use
under water.
The water resistance of your timepiece
may eventually be compromised over time
with general wear and tear and the use of
your watch under adverse conditions.
Always remember to employ the screw
down crown (if available) to maintain the
water resistance
Warranty may be voided if the screw down
crown has not been properly employed.
Note that you should
watch in a jacuzzi, hot shower or steam
room where steam may enter the case
despite the watertight seals used to protect
your watch.
The steam may cause condensation inside
your watch, which may affect and damage
the inner workings of your watch – which
would also not be covered by the warranty.
of your timepiece.
NEVER
wear your