Playing Back Music In Mp3 Format; Programmed Play; Cassette Operation - AEG SR 4353 Bedienungsanleitung

(11)
The CD stops.
PROG./P-MODE (21)
• In stop mode for programming any order of tracks (see
the section on "Programmed Play").
• When playing back music to select the replay mode (see
next chapter).
When playing an audio CD:
Press once = (The symbol
is repeated continuously.
Press twice = (The symbol
played continuously.
Press three times = (RDM appears in the display) all titles are
replayed successively in random order.
Press four times = (INTRO appears in the display) every title
of the CD is played for 10 seconds each.
Press five times = All functions are cancelled. The normal
play mode is resumed.
Only when playing CD' s in MP3 format:
Press once = (The symbol
is repeated continuously.
Press twice = (The symbol
played continuously.
Press three times = The selected folder of the MP3 CD is re-
peated continuously (
in the display).
Press four times = (RDM appears in the display) All titles are
replayed successively in random order.
Press five times = The function is deactivated and the CD is
played in the normal mode.
FOLD+/+10 and FOLD-/-10 (22/20) (only with MP3 CD' s )
• Press this button during playback to skip forward, or back
by 10 titles each (if more than 10 titles are stored on a
CD).
• Keep the button pressed down to select the next or
previous folder (if the CD contains several folders).

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the button (11).
2. Press the "PROG./P-MODE" button (21). "P01" (preset
location) appears on the display and PROG flashes on
the display. Use the / buttons (9/8) to select the de-
sired track and then press the "PROG./P-MODE" button
again. The display changes to memory slot P02.
3. Select the next track with the / button and press the
"PROG./P-MODE" button again. Repeat the procedure
until all the desired tracks are selected.
4. Press the
5. Press once the button to stop the playback while retain-
flashes) the current track
6. To play the programme back again, press the
is lit) the whole CD is
7. To delete the program, press the button twice. The
The device stops automatically after all the programmed
titles have been played back. The PROG display will go out
and the programmed sequence will be deleted from the
memory.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in
flashes) the current track
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
is lit) the whole CD is
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
FOLD appears
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.

Cassette operation

Playback of cassettes
1. Set the function selector switch (26) to position "TAPE
2. Press the
3. Slide a recorded audio tape into the deck with the tape
4. Close the cassette deck again.
5. Press the button (13) to restart the playback.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FUL" flashes in the
display.
/ button (10). The playback starts. The
first selected track number is shown on the display, the
message "CD " or "MP3 " and PROG is shown on
the display.
ing the program.
button.
PROG control lamp goes out.
OFF".
button (17), to open the cassette deck (15).
opening facing upwards and with the side to be listened
to facing the front (full reel to the right).
English
37
/