Herunterladen Diese Seite drucken

digimess BP3002 Gebrauchsanweisung Seite 4

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1.5 Warranty
The perfect working order of the power supply is guaranteed for 12 months as from delivery.
There is no warranty for faults arising from improper operation or from changes made to the power supply or
from inappropriate application.
If a fault occurs please contact or send your power supply to:
Agents details :
The power supply should be sent in appropriate packing - if possible in the original packing. Please enclose a
detailed fault report (functions working incorrectly, deviating specifications and so on) including unit type
and serial number.
Would you also kindly verify warranty cases by enclosing your supply delivery note. Any repairs carried out
without reference to a valid warranty will initially be at the owner's expense.
Should the warranty have expired, we will, of course, be glad to repair your power supply as per our General
Terms Of Assembly And Service.
1.6 Description
®
The digimess
BP3002 is a low cost general purpose linear dc power supply unit with both plus and minus
outputs. The power supply can operate in either constant voltage or constant current modes and features
large red LED displays for both voltage and current. Short circuit and current limit protection are included
and the BP3002 is supplied with a mains lead and an operating manual.
2 Technical Data
2.1 General Data
Nominal temperature:
Operating temperature:
Relative humidity:
Atmospheric pressure:
Operating position:
Operating voltage:
Frequency:
Safety class:
Radio interference suppression:
4
+ 23 °C  1 °C
0°C to + 40 °C
< 90 %
70 to 106 kPa
horizontal or inclined by 15 °
sinusoidal alternating voltage (distortion factor < 5 %)
207 – 253V
50 to 60 Hz ( 5 %)
1, according to EN 61010 Part 1
EN 55011 Class B

Werbung

loading