Maintenance, Cleaning And Repair; Contact Information - Konig & Meyer 12167 Nutzungsinformation

Maintenance, cleaning and repair

Maintenance: Regularly check if the screw connections are tight.
Cleaning: Use a slightly damp cloth to clean the tray. Do not use chlorinated or abrasive
cleaning agents. These will cause damage to the surface and varnish.
Repair: Immediately repair any damage that occurs and stop using the tray.
Maintenance work may only be carried out if you have the necessary knowledge. If any parts
are missing,contact the manufacturer at www.k-m.de. Here you can find a corresponding
spare parts list by entering the article number on the type label. Use this page to reorder
missing or damaged components.
Fault and troubleshooting
Fault/cause
Tray wobbles when attached
to DJ desk
Tray does not stay at adjusted
height
Tray plate wobbles or is unstable
DJ desk is unstable and tends
to tip
Storage, disposal
Store the tray in a dry place.
Recycle the components after they are disassembled:
Scrape all components made of metal.
Recycle or reuse all plastic, paper, and cardboard components.
Sort all other components according to material composition and dispose of them
according to local regulations.

Contact information

KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Phone: +49 9342/8060
Fax: +49 9342/806-150
E-Mail: contact@k-m.de
Web: www.k-m.de
12167-000-55 Rev.02 03-80-926-00 10/22
Check/Remedy
 Check screw connection between tray and DJ desk and
 tighten if necessary.
 Check clamping screw at retaining tube and tighten if
 necessary.
 Take note of the weight capacity.
 Check clamping of incline adjustment and tighten if
 necessary.
 Check tray plate screw connection and tighten if
 necessary.
 Reduce the length of the extension or the weight on it.