Cleaning And Storage - oneConcept Hightower 2G Bedienungsanleitung

EN
18
1. Place the tower fan on a stable and level surface. Insert the mains plug into a
wall socket (220 V). The LED display shows the current temperature.
2. Switching on: Switch on the fan by pressing POWER.
3. Fan level: Set the level to the desired intensity using the SPEED button: Low,
Medium or High.
4. Mode: Press the MODE button to set the fan to Normal, Nature or Sleep.
5. Panning movement: Press the OSC button to activate the wind direction
rotation. Stop the panning movement by pressing the button again.
6. Setting the automatic switch-off: Press TIMER to switch on the automatic
switch-off time. There are 12 intervals from 1-12 hours.
7. Energy-saving mode: If sleep mode or automatic switch-off is active, the
display goes off after 30 seconds. You can press any button to turn the display
back on.

CLEANING AND STORAGE

WARNING
Danger of electrocution! Disconnect the power cord from the
socket before cleaning. Do not immerse in liquid.
Cleaning
Clean the surfaces with a soft cloth.
Do not use petrol, thinner, harsh detergents, etc. as they will damage the unit.
Storage
Store the fan together with these operating instructions in a cool and dry place, if
possible in the original packaging.