Switching On/Off - Sygonix 2361018 Bedienungsanleitung

8 Notes on remote control use
When using the remote control, observe the following:
■
Point the remote control at the product control unit (example: battery box).
■
Keep the distance between remote control and control unit as short as possible.
■
Avoid obstructions between the remote control and the control unit.
■
Replace the batteries of the remote control when the product no longer reacts to remote
control input (also check the power supply of the product, if necessary).

9 Switching on/off

After setting up the product, switch it on to operate it.
Important:
– Never operate the product while it is in the packaging or rolled up.
– Do not cover the product while it is in use or cooling down.
9.1 Switching on/off via push button
Switch the product on and off via the button on the control unit.
1. Push the button on the control unit to turn the lights on.
2. To turn the lights off, push the button again.
9.2 Switching on/off via remote control
Switch the product on and off via the remote control.
1. Press the button ON to turn the lights on.
2. Press the button OFF to turn the lights off.
10 Controlling the lights
10.1 Controlling brightness
Increase and reduce the brightness of the lights.
1. On the remote control, press the button (+) to increase or the button (-) to reduce the
brightness.
10.2 Selecting light effects
Use the remote control to select a light effect that suits your needs. Each light effect corres-
ponds to a numbered button on the remote control.
1. Press one of the numbered buttons to activate a light effect.
10.3 Using the timer mode
In timer mode, the lights are on for the first 6 hours and then off for 18 hours. After that, the
process restarts.
1. To activate the timer mode, press the button TIMER on the remote control.
2. To deactivate the timer mode, switch the product off.
11 Cleaning
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
1. Switch the product off.
2. Let the product cool down to ambient temperature.
3. Clean the product with a dry, fibre-free cloth.
12 Storing
To store the product:
1. Disconnect the product from the power supply.
2. Let the product cool down to ambient temperature.
3. Remove all batteries from the product and any supplied accessories to prevent leaking.
4. Store the product in a dust-free and cool environment.
13 Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accord-
ance with applicable regulatory guidelines.
Remove any inserted (rechargeable) batteries and dispose of them separately
from the product. You as the end user are required by law (Battery Ordinance) to
return all used (rechargeable) batteries. Disposing of them in the household
waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate
that disposal in the domestic waste is forbidden. The designations for the heavy
metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (re-
chargeable) batteries, e.g. below the trash icon on the left).
You thus fulfill your statutory obligations and contribute to the protection of the environment.
4
14 Technical data
Light chain
Ingress protection .......................... IP20
Power supply ................................. 5 V/DC, min. 500 mA via USB
Number of lights ............................ 50
Replaceable lights ......................... No
Light colour .................................... Warm white
Colour temperature ....................... 2700 - 3000 K
LED life .......................................... 10000 h
Power cable length ........................ 50 cm
Total length .................................... 5.4 m
Distance between lights ................ 10 cm
Operating conditions ..................... 0 to +40°C, 0 - 90 % RH
Storage conditions ......................... 0 to +40°C, 0 - 90 % RH
Weight (approx.) ............................ 36 g
Remote control
Battery ........................................... 1x CR2025 button cell
Range ............................................ max. 5 m
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2361018_V1_0621_jh_mh_en