Care And Maintenance; Disposal - Wte Hph 3 Multi Betriebsanleitung

6

Care and maintenance

• Protect the hydraulic chuck against corrosion during storage.
• Ensure that the hydraulic chuck is stored in the unclamped position.
EN • The clamping screw is to be cleaned and re-lubricated at regular intervals depending on usage and the ambient condi-
tions.
• If the stop screw for axial tool length adjustment is clamped frequently, it must be cleaned and lubricated at regular in-
tervals.
• Repairs may only be performed at WTE.
• Instructions for cleaning in a washing facility:
• Clean the hydraulic chuck only in the unclamped position.
• The clamping screw may only be clamped or relieved at room temperature.
• The washing temperature must not exceed 100 °C.
• After cleaning, regrease the clamping screw.
7

Disposal

Once the hydraulic chuck reaches the end of its service life, it must be disposed of with due care for the protection of the
environment. The hydraulic chuck can also be sent to WTE for proper disposal.
56
Montage- und Betriebsanleitung
Installation and Operating Instructions