fontastic Glob Bedienungsanleitung

User Manual
Thank you for choosing a Fontastic
User Manual carefully and comply with the safety instructions.
The Glob is equipped with plugs for Europe, the United States, Australia and the
United Kingdom and enables you to use your appliances worldwide.
It is also equipped with two USB-A ports.
THE ADAPTER IS NOT A VOLTAGE CONVERTER
Use this adapter only with devices that are designed for use with 100-250 volt.
The input voltage of the device you want to connect has to match with the output
of the local power grid.
Package Contents:
• Universal worldwide adapter Glob
• Pin earth adapter
• User Manual
Unpack the product and check the package contents. Should any of the items
listed above be missing, repackage the product and take it back to your dealer.
Overview:
1. Slide Control AUS/CN Plug
2. Slide Control UK Plug
3. Slide Control USA Plug
3
4. Fuse Button
5. Pin earth socket
2
6. USB ports
7. LED Indicator
1
8. Pin earth adapter
User Manual:
Use of the adapter Glob in over 190 countries
Use with other plugs on a pin earth wall socket
If you want to use a device with another plug on a
pin earth wall socket, take the pin earth adapter out of the
socket of the Glob and plug it into the wall socket.
Note: You can connect devices with a power consumption of
up to 16A (250V, 4000W) with the pin earth adapter.
Please keep in mind that the pin earth adapter has
no separate fuse. (fi g. 1)
Fuse of the Glob
The Glob has a built in 10A fuse (corresponds to 1000W at 100V and 2500W at
250V). The fuse is activated in case of am overcharge and disables all current.
To reset the fuse disconnect the connected appliances or devices.
By pressing the fuse button on the Glob the fuse is reset and it is ready for use.
Use with other plugs on a pin earth wall socket
If you want to use a socket in other 190
countries with another socket, plug the pin
earth adapter into the Glob's socket. Slide
the slide control of the desired plug
(USA/UK/AUS/CN) downwards and push it
forward all out. Make sure the plug has locked
into place.
Now you can plug the Glob into a corresponding
wall socket. (Fig. 2)
Use with Pin Earth/Euro Plugs
If you want to use appliances with pin earth
plugs in over 190 countries, remove the pin
earth adapter from the Glob . Slide the slide
control of the desired plug (USA/UK/AUS/CN)
downwards and push it forward all out. Make sure
he plug has locked into place. Now you can plug
the Glob into a corresponding wall socket. (Fig. 3)
Registered trademarks are the property of their respective owners. Improvement and changes of the technical specifi cations and other data's could be made without prior notice. Fontastic, by D-Parts Mobilphon & Zubehör GmbH ● Birkenweiherstr, 16 ● 63505 Langenselbold, Germany / V1_03_19
Universal Worldwide Adapter„Glob"
® Product. Please read this
4
8
5
6
7
(Fig.1)
(Fig.2)
(Fig.3)
Using the Glob with Pin Earth Sockets
If you want to use the Glob as a travel charger on a
pin earth socket , plug the pin earth adapter into the
wall socket, choose one of the integrated plugs of
theGlob, slide it out of the case and plug the Glob into
thepin earth adapter. (Fig. 4)
USB Ports
The Glob is equipped with 2 USB-A ports.
This enables you to charge two USB compatible
devices at the same time. Connect the USB cable
of your device to one of the USB ports on the Glob.
(Fig. 5)
Compatible Power Plugs
The Glob can be used with the following
types of wall outlet sockets:
Type A Type B Type E Type F Type G
Compatible sockets
The Glob can be used with the following types of wall outlet sockets:
Type B Type E Type F Type G
Safety Warnings
• Wall outlet sockets have to be freely accessible to be used with the Glob
• Never open the device
• Do not submerge the device in water and protect it from moisture.
• Never connect the adapter to an appliance with force
• Keep electronics out of reach from children
• Disconnect electronics from the power grid if they are not used for extended
periods of time
• Do not use the device when it is visibly damaged
When used incorrectly no liability is assumed.
If you need technical support, contact our support time via e-mail at service@
fontastic.eu.
Technical Data:
• Input: 100V-250V, 50/60Hz
• Output: 10A (1000W/100V or 2500W/250V)
• USB-A Ports: 5V DC/2.4A Total (Max 2.4A per port)
• Fuse: 10A
• Dimensions: 68mm x 49mm x 66mm
• Weight: 195g
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the
national legal system, the following applies: Electrical and electronic
devices may not be disposed of with domestic waste. Consumers are
obliged by law to return electrical and electronic devices at the end of
their service lives to the public collecting points set up for this purpose or point
of sale. Details of this are defi ned by the national law of the respective country.
This symbol on the product, the instruction manual or the package indicates that
a product is subject to these regulations. By recycling, re-using the materials or
other forms of utilising old devices, you are making an important contribution to
protecting our environment.
Certifi cation/General Information
We hereby declare that this device carries the CE mark in accordanc
regulations and standards. It conforms to the fundamental requirements
of the (RED) 2014/53/EU.
GB
(Fig.4)
(Fig.5)
Type I Type L
Type C Type J
Type I
Type N