Oregon Scientific BAR228 Bedienungsanleitung Seite 5

10. Your smart device might take several minutes after setup to download data.
NOTE
• The pairing mode of the Weather
• Bluetooth wireless technology operates within 30 meters (98 ft) range and varies if there are physical obstacles,
such as a thick wall in between your smart device and Weather
• Once the pairing is successful, the Weather
on your smart device is turned on, or it moves within range of the base.
• The room type preset values are for reference only. Actual conditions may vary.
• If you unpair/remove a device from the app, the data stored for certain device in the app will be removed.
• To ensure your device syncs and stores the data, Open the Weather
device after each reset or battery replacement.
PLACEMENT OF WEATHER
+
Weather
Method
Table Stand
Wall Mount
For the best results:
• Place the sensor out of direct sunlight and moisture.
• Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.
NOTE If you are installing more than one Weather
interference.
+
turns off after 30 seconds.
+
connects with the smart device automatically when the Bluetooth
+
+
Place the Weather on a flat surface.
+
Attach the Weather unit to the wall using the wall mount hole at the back.
+
, place the device as far as possible from each other to avoid
5
+
.
+
apps and press
Instruction
to reconnect the