Optical Mode; Operation; Setup Menu - Sonoro PRESTIGE SO-331 Bedienungsanleitung

14 Optical mode

14.1

Operation

Your external player (e.g., audio amplifier) must be connected to the optical input
jack of PRESTIGE with an audio cable (with optical connector, not supplied).
To access the Optical
mode
To start and control
playback
To mute or restore the
sound output
14.2

Setup menu

Press SETUP in optical input mode to access the setup menu (see chapter "Using
the menus"). The following options are available and the current settings (if
applicable) are marked with an asterisk (*).
• [Bluetooth headphone]
To connect or disconnect to Bluetooth headphones, see chapter "Basic
operation".
• [System Settings]
See chapter "System Settings".
• [Main menu]
To access other playback modes, alarm or sleep timer.
The optical input only supports linear PCM, 2 channels 16 bit or 24bit music
sources.
94
Press key on the remote control.
Or, press MENU once, then
navigation knob) to select the Optical mode and then
press OK to confirm.
Perform all playback operations on the external
player.
Press or button.
or (or rotate the
© sonoro audio GmbH 2022