Werbung
Programming with teach adapter
Standard teach-mode – Setting two operating ranges within 360°:
T..
T1
T1
T..
T2
T2
Standard teach-mode
(user selected operating range)
Press T1 or T2
for 5 sec.
Power LED
starts flashing
Teach switchpoint OUT 1
Span defined as
N.O. in CCW direction and
N.C. in CW direction from start position
Place sensor at selected
start point
Press T1
Defines start of
for 1 sec.
operating range
Power and output 1 LED
flash continuously
Place sensor at selected end point
Press T1
Defines end of operating range
for 3 sec.
Power and output 1 LED
will flash for 3 sec. and then turn ON
Teach-Mode Out 1 completed, sensor ready for operation
To continue with teaching switchpoint Out 2:
Press T1 or T2 for 5 sec.
Power LED
starts flashing
Teach switchpoint OUT 2
Span defined as
N.O. in CCW direction and
N.C. in CW direction from start position
Place sensor at selected
start point
Press T2
Defines start of
for 1 sec.
operating range
Power and output 2 LED
flash continuously
Place sensor at selected end point
Press T2
Defines end of operating range
for 3 sec.
Power and output 2 LED
will flash for 3 sec. and then turn ON
Teach-Mode Out 2 completed, sensor ready for operation
Teach switchpoint OUT 1
Span defined as
N.O. in CW direction and
N.C. in CCW direction from start position
Place sensor at selected
start point
Press T1
Defines start of
T1
for 3 sec.
operating range
Power and output 1 LED
flash quickly
Place sensor at selected end point
Press T1
Defines end of operating range
T1
for 1 sec.
Power and output 1 LED
will flash for 3 sec. and then turn ON
Teach switchpoint OUT 2
Span defined as
N.O. in CW direction and
N.C. in CCW direction from start position
Place sensor at selected
start point
Press T2
Defines start of
T2
for 3 sec.
operating range
Power and output 2 LED
flash quickly
Place sensor at selected end point
Press T2
Defines end of operating range
T2
for 1 sec.
Power and output 2 LED
will flash for 3 sec. and then turn ON
Werbung
