Werbung
Teach adapter TX1-Q20L60 for programming
of TURCK inclinometer
B1N360V-Q20L60-2UP6X3-H1151
The TURCK inclinometer B1N360V-Q20L60-
2UP6X3-H1151 is programmed with the
teach adapter TX1-Q20L60
By pressing the keys T1 resp. T2, the user
can set two operating ranges within 360°.
For this, a start and an end value needs to
be programmed for each operating range.
Alternatively, two switchpoints can be pro-
grammed with a hysteresis of 1° within the
default set operating range of 180°.
Wiring diagram
Output 1
Power
Output 2
0°
T2
T1
180°
1 BN
out1
4 BK
2 WH
out2
3 BU
5 GY
ext. teach
T1 = Teach GND (–)
T2 = Teach U
B
▪ Programming the TURCK inclinometers
with the keys T1 and T2
▪ Standard teach mode with setting of
switchpoint 1 and 2:
– for two operating ranges within 360°
– with a hysteresis of 1° within the
default set operating range of 180°
▪ The switchpoints are either CW or CCW
programmable
+
–
(+)
Werbung
