Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Work lamp 3W 220L
Item No. 2435654
Work lamp 7W 640L
Item No. 2435655
Intended use
The product is intended to be used as a work light. It has an automatic switch-on function,
which is controlled by a PIR sensor.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided at all costs.
The work lamp is supplied with power via an integrated battery and may only be charged via
a USB power supply. This USB power supply must be able to supply the current consumption
value listed in the 'Technical data'.
Any use other than that described above will lead to damage to the product and will expose you
to additional risks such as eye damage, short circuit, fire, electric shock, etc.
This product complies with statutory, national and European regulations. All company and prod-
uct names contained herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Work light
• USB Cable
• 4 screws
• 2 adhesive pads
• 2 metal plates
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Description of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The symbol with the house is used to inform the user that the device may only be
operated and installed in enclosed rooms.
The arrow symbol indicates special information and tips on how to use the product.
Safety information
Read the operating instructions carefully and observe in particular the safety instructions.
If you do not follow the safety information and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• The product is only designed for private/household use, not commercial or in-
dustrial use.
• For safety reasons, any unauthorised conversion and/or modification of the prod-
uct is not permitted.
• Do not leave packaging material lying around carelessly. It may become a danger-
ous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, flam-
mable gases, vapours and solvents.
• Handle the product carefully. It can be damaged by impact, blows, or by being
dropped, even from a low height.
• Never expose the product to any excessive mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Discontinue use of the appliance in the event of malfunctions, defects or after a
fall and have it repaired by a specialist. Improper repairs may result in substantial
hazards to the user of the appliance.
• Please consult a specialist if you have any doubts regarding the use or safety of
the product.
• Maintenance, modifications and repairs must be carried out by a technician or a
specialist repair centre.
• If you are not sure about the correct connection or operation or if questions arise
which are not covered by the operating instructions, please do not hesitate to
contact our technical support or another specialist.
• Moreover, observe the additional safety instructions in each individual section of
these instructions.
• Also observe the safety information and operating instructions of any other de-
vices that are connected to the work light.
b) Rechargeable battery
• The in-built battery cannot be removed and can only be charged in the device.
Never attempt to remove the battery and charge it with an external charger.
• The battery may only be charged via the USB port of a USB power supply with a
suitable load capacity (see 'Technical data'). Using another power supply with a
different charging current may damage the device and cause the in-built battery to
overheat, catch fire or explode.
c) Operation
• Warning, LED light
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
d) Installation
• When screw mounting the metal plates, ensure there are no cables, wires, or
pipes located underneath the mounting surface.
• Inadvertently puncturing electric cables can cause life-threatening electric shock!
Components and controls
1 Bracket for suspending
2 Low battery alarm
3 battery level indicators
4 USB Socket
5 PIR sensor
6 Function switch
7 Magnet
Charging the Battery
The battery of the work lamp must be charged via a USB power supply that provides
an output voltage of 5 V/DC and has a current rating of at least 1 A. If the USB power
supply does not meet these requirements, it or the work lamp may be damaged.
USB interfaces on computers are often not powerful enough to charge this device.
In the event of overload, the USB interface or the computer may be damaged.
Fully charge the battery before using the camera for the first time. The charging du-
ration is approx. 4.5 hours (model 3W 220L) or approx. 14 hours (model 7W 640L).
Charge the battery on a regular basis, even when you are not using the device (at
least every 2 months). Failure to charge the battery regularly may cause the battery
to deeply discharge, which can cause permanent damage.
1
2
3
Off
On
Lo
Hi
4
Auto
5
6
7
Werbung
