Petoneer Smart Odor Eliminator Benutzerhandbuch Seite 5

How it works: The Built-in ozone generator converts O2 in the air to O3. O3 which has
active oxidizing properties, which can, at the source in the cat toilet, decompose the
odor molecules and re-convert it into harmless. It can also destroy the cell membrane
structure of bacteria and has a certain sterilization effect.
Mode I
(Timing Mode: release ozone once every interval)
Mode II
(Timing Mode with Infrared sensor enabled: after
the infrared sensor gets triggered, it releases
ozone after 1 minute)
Operations:
1. Paste the metal plate onto the foam sticker and attach the sticker
to the position you expect.
2. For closed cat toilet: Stick the foam sticker onto the cat toilet hood;
For open cat toilet: Stick the foam sticker onto the wall near the cat toilet
(about 5 cm above the cat toilet);
For other scenarios, place the device closer to the odor source.
OFF
(The eliminator is switched off)
Micro USB Port
5