Safety during operation
WARNING
Do not use the device:
•
•
•
•
•
•
•
•
•
•
•
If the device, the electric cable or plug shows damage or is malfunctioning,
immediately take the appliance out of use and disconnect the power supply.
Transport and storage
•
Clean the device before storing it.
•
Transport the device upright.
•
Store the device upright in its original packaging in a cool, dry and dust-free area.
Assembly
WARNING
Never use the device before it is correctly mounted.
The device is packed in one box. Remove all packaging material and check that the device is
not damaged. Do not use the heater if it is damaged, but always contact your supplier. Keep
the packaging for safe storage and transport.
Wall mounting
WARNING
The wall used for mounting must be made from non-flammable material and
should be able to withstand a minimum temperature of 200 °C.
WARNING
Never use an extension cord to provide power to the Alutherm Sani.
26
outdoors or in a small space (800 W < 8 m
if any parts are dirty or wet;
near large objects, like behind a door, under a shelf or cupboard;
near a water source in zone 1 and zone 2, like a bath, shower, swimming
pool or open window;
near or in a dusty and dirty environment, like a construction site;
near flammable materials, liquids or fumes, like a shed, stable or green
house;
near other heat sources and open fire;
immediately below a socket outlet;
with an appliance that automatically switches the device on, such as a
timer, dimmer or any other device;
lying, leaning or standing;
near, under or facing a socket outlet.
3
3
, 1200 W < 12 m
);