Control Panel - EUROM Alutherm Sani Wi-Fi 800 Bedienungsanleitung

Control panel

1. ON/OFF button
2. LED display
3. SET button
4. WEEK button
5. Minus button
6. Remote control receiver
7. Plus button
8. Mode button
LED display
The LED display will go dark if no adjustments are
made for 2 minutes. The LED display will light up
again when you press a button.
Status indication (Figure 4, pos. 1):
•
The 2 suns indicate whether the heater is set
to low or high capacity.
•
The Wi-Fi symbol indicates if there is a Wi-Fi
connection.
•
The "P" indicates that the program function is
active.
•
The "M" indicates that the manual function is
active.
Temperature indication (Figure 4, pos. 2):
•
SET indicates that the SET temperature is showed on display.
•
ON indicates that the heater is switched on.
•
OFF indicates that the heater has been switched off by the stand-by button.
•
Temperature shown in degree Celsius.
Time indication (Figure 4, pos. 3):
•
Time shown in 24-hours format.
•
Open window is active.
Day indication (Figure 4, pos. 4):
•
Number corresponds with the day of the week: 1 = Monday, 2 = Tuesday, and so on.
Figure 3
Figure 4
23